Spooktacular Party PTU

Supplies needed for this tutorial:
PTU Spooktacular Party by Jen's Sweet Temptations, you can purchase this kit at http://www.lollipopsngumdrops.net/store/index.php?main_page=product_info&cPath=68_87&products_id=10501
font of choice, I used Poisoned Apples size 36, you can find this font at http://www.dafont.com/search.php?psize=m&q=poisoned+apples
Tubes of choice, I am using just the elements from the kit.
Template number 119 by Creationz by Sharon, you can download this template here

Let's get started:
Open your template in psp, and hit shift+D to make a new copy and close the original.
Delete the credits.
Go to black shape and select all, float and deflota.
Select paper 3 and then invert, delete and then merge down.
Do the same with the other layers but change the papers from time to time.
*Tip I am making all the rectangles the same color.
Now using your magic wand click inside the frame, and put your tube/tubes in the frame, then hit selections, invert and then delete.
For mine I used the house for inside my frame.
Open Bear 1 and resize to you liking and put in the corner right of the frame.
Open the Halloween kitty cat and resize to about 35 percent and place on the bottom left of your frame.
Open up the Mummy and also resize that one to 35 percent and place on the upper left frame.
Open Witch 2, resize to 35 percent and put on the lower right of frame.
Then open bow 2 and place above the frame.
Now add your text, using colors of choice from your tag.
Now add your credits, merge visible and save, then your done.

The Devil's Tear Drops

This tutorial requires some knowledge of Paint Pro Shop. Please don't tear/rip apart my tutorials.  Please read my TOU for further information. I would love to see your results so please contact me with it so I can put it up in a gallery here on my blog.

Supplies needed for this tutorial:
Paint Pro Shop ( I am using PSPX3 but any version should do)
PTU Scrapkit Devil's Tear Drop by Black Widow's Creations can be purchased at Underground Scraps.
Frame of choice, I am using Image 57 from the kit.
Plugin used Dsb flux-Spiderweb can be found here, must be member to access this part of the forum.
Mask of choice, I am using WSL Halloween Mask 2 by weescotlass creations
Font of choice, I am using Halloween Spider size 24, can be found at http://www.dafont.com/theme.php?cat=803
Tube of choice, I am using Adiene's gargolian daughter GG found at http://dragonslairtubes.com/ must be a member to download the FTU tubes.

Now let's get started:
Open PSP, new image 500x500.
Now flood fill with black.
Open mask.
Now go to layers, mask from image, invert unchecked and apply your mask.
Now we are going to go to effects and apply Spiderweb, please see example below for settings...

Now that you did that open Image 57 and resize to about 55 percent, then using your magic wand click inside your frame and expand to about 4, then open paper 10, paste as a new layer, selection invert and then delete.  Put the paper under the frame layer.

Now add your tube on the bottom of the frame, resize if needed, I am resizing mine to about 50 percent.

Now we are going to add some elements...

If your using my example I am using the following elements...

Image 2 resize to 15 percent and place in the middle of the two frames.

Image 9 resize to about 25 percent and place in the first frame.

Image 26 resize to 15 percent and place on the bottom left of the frame.

Layers duplicate and image mirror.

Now it is time to add your text.  Go to Halloween Spider size 24 and type your text, then we are going to use the spider effect like above, you may pick colors from either you tube or whole tag .

Now your done, add your credits and copyright informations and merge visible and save.  Thanks for doing my tutorial.

Cute As A Bug

This tutorial was written by Amanda Carter, if you have any questions regarding this tutorial please feel free to write me at carter_mandy@bellsouth.net.  You can also show me your results so I can post them in a gallery here on the blog.  Please don't rip apart this tutorial.

Supplies needed:
Paint Pro Shop
PTU Scrapkit WWD_Cute As A Bug by WackieWinnie Designz can be bought here
Frame of choice, I am using Frame 2 from the kit
Mask WSL 355 by weescotlass creations can be found here
Font of choice, I am using A Yummy Apology size 30 found here
Plugin- Eye Candy Glow (Can be either 3,4 or 6), just google the plugin to find
Tube of choice, I am using Popeye Wong's Soft Breeze, which is free to use and his work can be found at http://popeyewong.com/

Now let's get to work.
Open a new image 600x600, and flood with white, select all, open paper 4 then paste into selection.
Apply your mask and merge your group.
Open frame 2 and copy and paste as a new layer and resize to about 45 percent.
Click inside your frame, modify and expand to about 5 and put paper 1 in it, by selecting invert then hitting delete.
Now do the same with your tube.
Now were going to add some elements around your frame, here is what I used...
Ballon resize to about 35 and paste above your frame in the left hand corner, then duplicate and mirror the image.
Bug 1 resize to about 15 percent put in the lower section of the tag and then duplicate and mirror the image.
Bow1 resize to about 15 percent and put on the bottom of the heart frame.

Now it is time to add your text, A Yummy Apology size 30, use colors from your tag.
Now were gonna make our text glow, using the settings below...

Now add your credits and your done, thanks for doing this tutorial, remember to merge all layers.

PTU Fallen

Supplies needed:
Paint Pro Shop
PTU Scrapkit by Black Widow Creations found at http://undergroundscraps.info/
Frame and Tubes used are from scrapkit
WSL_ Halloween Mask 1 found at http://weescotslasscreations.blogspot.com/search/label/Masks
font titled Cardinal found at dafot.com

Open a new image 500x600.
Pick a dark paper from the kit, flood fill and apply your mask, merging your group at the end.
Open Frame 2, and click inside the frame.
Pick another paper from kit and then go to selection, modify, expand by 4 and then copy and paste as a new layer then invert delete.
Then using your magic wand insert your images inside the frame.
Add some elements of choice in and around your frame and inside the web.
Now using the font specified above, about size 32 add your text and your done.
Remember to add your credits.

Thanks for doing this tutorial any questions please feel free to e-mail me at carter_mandy@bellsouth.net

The Ocean Dreams

This tutorial was written by Amanda Carter, anything that resembles another tutorial is pure conicidence.

Things needed:
Paint Pro Shop
PTU Ocean Dreams by Darkmoon's Dreams, you may purchase this beautiful scrapkit at http://enchanteddreamsboutique.com/index.php?main_page=product_info&cPath=1_25&products_id=2622&zenid=6b5b3838091f094afb12f124e0d56e12
Frame of choice I am using Frame 1 for the kit.
Mask of choice, I am using ta5n by Kathy-Tizzy's Angel which can be downloaded at http://creativemisfitscreations.blogspot.com/2009/11/grunge-masks.html
font of choice, I am using Sweetest size 35, this can be downloaded at http://www.fontspace.com/weknow/sweetest
Tube of choice, I am using SW426 "With a Heavy Heart", by Suzanne Woolcott, you have to purchase a license with her to use her tubes, the web address is http://www.gorjussarthome.com/store/

Now let's begin our tutorial!!!

Open PSP.
Open new image 500x600.
Now flood fill with a paper from the kit, I am using paper 05, using measurements of choice,I used 0 and 100.
Now apply your mask, and merge your group.
Now open frame 1 from the scrapkit and resize to about 55 percent, the drop shawdow of choice.
Now with your magic wand click inside both and pick a paper from the scrapkit, I using paper 03, then go to invert and then hit delete.
Now unselect it and merge down.
After doing that click inside frame one at a time this time, and put your tubes in.
Now open bow1, resize to about 25 percent and put on all 4 corners of the frame.
Now open butterfly, again resize to about 25 percent and place above the frame and underneath it.
now open flower04, resize to 15 percent and place in the middle of the frame.
now open the tag and resize it ot about 35 percent and place like mine, then add your text, with the colors from your tube/tag.

You will then put the proper copyright information, license number, and all the oher goodies and then merge visible and save and your done.  Thanks for doing my tutorial.

PTU Angel's Cry

This tutorial was written by Amanda Carter, please don't rip apart or claim as your own.  All ideas are of my own, so if it looks like someone eles did it, that is pure conicidence.  I would love to see your results so contact me with your results and I will post them in a gallery on my blog.

Supplies needed for this tutorial.
Paint Pro Shop
PTU Scrapkit Angel's Cry by BlackWidowCreations, you may purchase her beautiful work at http://undergroundscraps.info/
Word Art Mix 5 created by weescotslass creations found here
Tube of choice, I am using Scott Blair's Heavenly, which can be purchased now at http://psptubesemporium.com/, must have license to use.
Mask of choice I am using mask DBV86 by designs by Vaybs found here.
font of choice I am using Respective, has 3 choices to it, size about 25, can be found at http://www.fontspace.com/m%c3%a5ns-greb%c3%a4ck/respective.
Plugins used: drop shawdow and Xero-Porcelain ( download of this can be found if googled)

Now let's get started with the tutorial!!
Open PSP.
Open new image 500x600, and select all and put put a pattern of choice from the scrapkit into the selection, for the example of the tag we are gonna use pattern 5, then select none.
Apply your mask.
Layers,merge your group.
Now open frame 8 from your kit and resize ot about 60 percent.
Now with your magic wand select inside your frame, making sure that even the part under the ribbon is selected, and then go to modify, expand selection about 4.
Now pick another paper and put it inside the frame, I picked pattern 1, and then invert and delete anything hanging outta the frame.
Now add your tube, you might wanna resize it to fit inside your frame.
Now select the bottom of the tag and place doddle 5 and place behind the frame.

We are now gonna add about 3 different elements around the tag.
Bow 2 copy and paste at the bottom of the ribbon on the frame.
Rose 2 resize to about 30 percent and place in the upper left corner.
Candle 4 place on the other size of the frame.

Now were gonna add the text.
use the porcelain like so

and then dropshawdow like so..

Now were gonna add the word art with the same drop shadow then merge visible,and then add your proper copyrights and license information and your done!!!

Thanks for doing my tutorial

PTU Emolution 5

This tutorial was written by Amanda Carter, please don't rip apart or claim as your own.  All ideas are of my own. I would love to see your work so please either write me or post it in the group so I may showcase it on my blog.

Let's get started:

Supplies needed:
A graphic program of choice (I am using Paint Pro Shop X3, but others should work fine with it)
Frame 1 from kit
PTU Scrapkit Emolution 5 can be purchased at http://scrappindollars.com/, must be purchased to use.
Mask of choice I am using a grunge mask by Pinkrose found at http://creativemisfitscreations.blogspot.com/2009/11/grunge-masks.html
Font of choice I am using Accents found at http://www.dafont.com/theme.php?cat=501
Tube of choice, I am using Dean Yeagle's Mandy in Pink and can be purchased at http://www.cdoestore.com/, do not use if you don't have a license number to do so.


Open Paint Pro Shop, with a new image about 500 x 600, you may crop later if desired.
Flood fill with color of choice I am using a pink from my tube.
Open your mask and apply it to your background then merge group.
Open frame 1 and resize to about 70%.
Now using your magic wand click inside frame, modify and expand to about 4, then pick a paper, invert and delete any that hangs outside of the frame. (I picked paper5).
After doing all this, move your paper under the frame and then do the same thing you did with the paper for the tube.
Now open the wordart found in the element section of the kit and resize to your liking and drop shawdow it to whatever you think looks good.

Now the elements:
Bow 5 resize to about 50 percent and place somewhere on the bottom.
Butterfly 1 resize to about 20 percent and put on the left top corner.
Open barbed heart and resize to 20 percnet and place on the bottom right corner.
Now open the star button and resize to 20 percent and place somewhere around the frame, duplicate 2 more times and place around the frame.
Now add your text and your copyright information, and merge together and your done.

Thanks for doing this tutorial.