PTU Easter Day

Supplies needed:

Paint Pro Shop (I am using X3)

PTU Scrapkit Easter Day by Rebellious Scraps and can be bought here.

Mask of choice ( I am using a mask by Vix which is #384, and can be found here.
Template used is #40 by punkybutts tutorials located at this website.
Font of choice, we are using Kunstler.

Tube of choice, I am using todayestr1found at graphicpieces, which is located here.

This tutorial is written with Paint Pro Shop X3, but any version should work, you will need common knowledge on how to use the program, good luck with this tutorial. Now let's begin...

Open your tube of choice in Paint Pro Shop.

Now your gonna open Template #40.

Delete the credits.
We are going to keep the colors on this template the same cause they are so beautiful as they are.

We are now going to add the tube, and if your using the tube I am we are gonna resize by 60 percent.

Move whereever you like.
Now we are going to go to your scrapkit and pick some elements to go with it.
I am gonna pick bow 1, copy and paste it, resize by 20 percent and place on the top of the template.

Then use a dropshawdow of choice, my settings are H-3,v-3,Opacity 25, and blue 4.00 with the color black.

I am gonna pick another bow, number 2,resize again to 20 percent and then use the same dropshawdow as above, then place on the bottom of the template.
Put the daffodils 2 inside your frame, and dropshawdow.

Then open chocolate eggs and place them near the daffodils to make it look like they are hiding., but resize the eggs to 10 percent.

Now open your font ( I am using Kunstler Sunrise), amd type your text, with 2 of the papers from the scrapkit, I am using papes 1 and paper 4. now put these two papers inf your material pallet andpick one to airbrush your text.

Now merge all of your layers together except the background.

Then pick one of your papers from the srapkit and copy and paste it into your back by selecting all and then paste into selection, and then apply your mask.

Put your copyright information and then your done.

Thanks for trying my tutorial.

Then your gonna select none and apply your mask.

PTU Perfectly Pink

Supplies needed:
Scrapkit of choice, I am using Perfectly Pink by kdevita at lollipopsngumdrops. You can find the site here
Tube of choice(I am using 884-1 Pinuptoons_Bows),you can find this tube at Creative Design Outlet.
font of choice, I am gonna use ALS Script (you can find this font and several others at this website,but need to become a member to get it.
Program of choice (we are using Paint Pro Shop X3,but any should be able to work)
Template by Missy which is missy_tagtemplate #383, you can find these templates at this location.
The special effects we are gonna use on this tutorial is add/remove noise and drop shawdow.

Now let's begin our tutorial today...
Open your Template in Paint Pro Shop.
Delete the artist information.
Highlight the rectangle,select all,float and then defloat.
Pick a paper from your scrapkit,copy and paste then invert and delete.(I picked paper10)
Merge down and then we are going to add some noise to it.  We are using the settings as listed.. Random checked,45%, Monochrome checked.
We are then going to select the thin rectangle, select all,float and defloat and then we are going to pick another paper,invert delete,then merge down. ( I used paper 8).
You are then gonna add the noise again with the same settings as above.

We are now going to do the circles.
Select your large circle right and do the select all,float and defloat. Pick a paper that will compliment your tube.  Mine will be paper 6, then we will do the invert and then delete,merge down then select none.
Do the same to your large circle left that you did as above.

Now we are gonna do squares 1 and 2.
Click on square 1, select all, float and defloat and pick a paper from the kit.(I am using paper4).
Then paste as a new layer,invert,delete and then select none and merge down.
You will do the same to square 2 as you did with square1.

Now it is time to do the circle back which we are going to do just like the others.  I picked paper 5.
Remember after you paste as a new layer,invert and delete you must merge down.
Your gonna use the same paper for the circle that you did for the circle back.

Now we are going to do the other squares and Pick another paper (which I am gonna use paper 1 this time), and do the same thing as we did the others.
Make sure you use the same thing for the other squares so it matches.
Pick another paper for the center square, I am picking this time paper 10.

Now it is time to do the last circles, we are going to do the same as above, picking paper 2 this time, but keep selected cause this is where we are going to put our tube in.  You will copy and paste your tube and then hit delete but with the other circles you will have to duplicate your tube and place them so it looks nice and neat. Then merge down the tubes, and then merge down the tubes to go into the circles.
Now with the wordart we are gonna select all,float and delfloat and pick a paper you have not used and paste as a new layer, once you have done the inverting and merging you can add some noise of choice.

Now that we are done with the template part, we are gonna add the text.
Select the text ALS Script and put in your text, making it fit right above the bottom of your wordart. I did size 48, move to the top and then dropshawdow of your choice, now make sure you can see your text by doing some colors from your tube.
Now your gonna add your copyright information, remember license number if your using a PTU artist, merge all, save and your done.

Thanks for doing my tutorial, all of this tutorial was my idea no ones eles so if it looks like anyone eles then it was purelly by accident.

PTU Secrets of a Princess

Supplies needed:
Paint Pro Shop Program (I am using version X3)
Tube of choice ( I am using a Deedlith tube which can be found here.)
Template Pack 2 FTU by Crazycakes Scraps, you can find her beautiful templates by clicking here
Special effects Add/Remove Noise (optional)
Eye Candy 5 Impact- Gradient Glow
Artist Effects-Neon Glow
Scrapkit used is Secrets of a Princess by dnscraps and can be bought here
font of choice ( I will be using Dotumche 36 )



Ok let's begin this wonderful tutorial....
Open template titled ccsfabulous.
Delete the copyright information.
Select the Big Star.
Select all, float and then defloat.
Then we are going to go to our scrapkit and choose a paper ( I am choosing Paper 28.)
Copy and paste as a new layer, then invert, delete.
Select none and merge down.
Then we are going to go to add/remove noise, and use with these settings: Unifom check, 25, monochrome checked and apply setting, Now remember to do that both to the big star and big starsback.
Now we are going to select Raster 1.
Select all, float and then defloat.
We are then again going to do the same thing we did with the big star with the same paper and then the same settings as the above for the add/remove noise.
We are also going to do the same with the line as the layer Raster 1.
We are now going to go to the mini star and select all, float and then defloat.
Then pick a different paper for these stars. ( I picked paper 13.)
Invert, delete and then merge down.
Then we are going to do Neon Glow in the Special Effects area with the settings of 50 for both.
Do the same as above for the ministar2.
Do all the ministars the same way.
Now we are going to select the star, select all,float and then defloat.
Pick a paper and then hit invert, delete. (I used paper8).
Then once again we do the add/remove noise with the same settings as used before.
Do the same as you did above for the starback on that one.
Select the word fabulous and select all, float,defloat.
Then we are going to pick a paper and hit invert then delete. (I picked paper6)
Merge down and then add/remove noise only this time with these settings:  Gaussian checked, make it 30 percent and Monochrome checked.
Do the same for the faback.
Close out the wordart and the glitterwordback.
Select the circle.
Select all,float and then defloat.
Pick a paper and then invert, then delete and then merge down. ( Picked paper2)
Now we are going to do the same for the circle2 only pick a different paper then the circle. (I picked paper
Then we are going to select all,float,defloat invert and then delete then we are going to merge down.

Now we are going to add your tube. Drop shawdow as desired.
Now it is time to add your text, move your text into the star.
Once your done writing your text then we are going to Eye  Candy 5 Impact Gradient Glow with these settings: Baby Colors,Outside Glow, mark selection with the glow radius 10,15,100,12,53,49.
Now we are going to add some noise with the same settings as last time.
Now add your credits and your done.
Layers merge visible.

Thanks for trying this tutorial.

PTU Swing Into Spring

Supplies needed:
Tube of choice I am using Pinuptoon which can be bought here
Mask(I used Spring Portal Mask Sabre) which can be found here
Template #2 found here
PTU Scrapkit Swing Into Spring by Jen's Sweet Temptations which can be bought at this site
Special effects used Noise
Paint Pro Shop (I am using PSPX3)


Ok let's begin our Tutorial today.

Open Template #2 in Paint Pro Shop.
Delete the watermark/copyright information.
Close out the background
With your wand select the Circle.
Then got to selections, Modify by 5 and pick a paper or color from tube of choice ( I am gonna use Paper 6.)
Copy and paste as a new layers, selection float,defloat and then hit delete, then merge down.
Select none.
Then we are going to select the Circle Frame.
Again use your magic wand select it, then we are going to pick a color from your tube and in a new layer, flood fill it.
Then select none, and again merge down.
Highlight dotted circle and do the same as above.
Make sure each dot is filled or it won't look right.
Merge down the new layer and then we are going to go to add/remove noise and this is the setting I am gonna use... Randow checked, Noise 10, Monochrome checked.
Now we are gonna select the sparkles and find a paper of choice ( I used paper 4) and then copy new layer, float,deleflot and invert, then delete.
Select none and then merge down, then again we are going to go to add/remove noise but this time we are gonna use these settings...Uniformed, 25, monochrome checked.
We are now gonna click on the doddle, pick one of the green papers, copy and paste as a new layer and do the same as above, only instead of using the magic wand, select all, float and defloat, then when you add as a new layer, then you go to invert and delete then select none and merge down.
Then add the noise with the same settings as above.
We are now going to reopen the background and select all.
Then flood fill with a paper of choice from the scrapkit (I used Paper 3.),
Select none and apply the mask of choice ( I am using the Spring Portal Mask Sabre),
Merge group.
Now that a template is complete it is time to add your tube, by clicking on the circle, select all,float,then defloat, then copy and paste tube, inverte delete.
Select none and drop shawdow as desired, I used V-3,H-3,O-25,Blur-4.00, Color Black,Shawdow on layer checked.
Now it is time to pick your elements.
I am picking elements Flower5, and Bows 3 and 4, place where desired. Remember to drop shawdow each, with same settings as your tubes.
(Some of the elements you may need to resize).
On Flower 5 I resized by 25 percent and use the pick tool to slant it alittle, I had to copy and paste it twice but it depends on which version of Paint Pro Shop your using.
You are now going to add your name, with the font of chioce I am using Curlz MT font Size 48 with the colors from your new created tag.
I used colors #c1abe9, and #5198d9. Then with the same drop shawdow used before drop shawdow your name.
Layers merge all.
Add copyright information, along with license if your using a PTU Artist and your done.

Thanks for trying my tutorial, any resemble to any other tutorials is just concidence.  I would love to see your results,which you can e-mail to me and I will put on display for everyone to see.

PTU Spring Sensations

Supplies needed
Paint Pro Shop (I used X3)
Tube of choice (I used KT Bryan and you can find his tube at Creative Design Outlet) by clicking here.
Scrapkit of choice( I am using Spring Sensations, which can be found at Scrappin Dollars) the website can be found here.
Plugin Eye Candy 5 Imapact-Gradient Glow
 font of choice (I am using Castellar)

Let's begin...
Open the frame by outlawbydesign located in the scrapkit (It is the purple one).
Use your magic wand and select inside the frame.
Open paper 2 and flood fill inside the frame. (now with the paper you might wanna use one that matches your tube.)
Place your tube inside the frame and erase anything hanging outside of the frame.
You will then drop shawdow of chioce.
I used the following settings:
Veritcal-5
Horizontal-5
Ocapacity-34
Blur-5
Color-Black.
Use element of choice.
I picked Bow 3.
Copy and place whereever you desire.
I then put my name inside the frame using the font Casteller size 48.
Then we go to Eye Candy 5 and pick your settings.
I used the following settings:
Baby Colors with the outside glow, Mask selection checked.  The Glow Radius as 10,Southern Corners 15,Overall Opacity 100,Distortion 12,Distortion Lump 53, and the Gradient 49.
You then will add your tube information and License number if you are using a PTU artist, then your watermark.
You are now done, thanks for trying my tutorial

Irish Blessings

For this tutorial you will need:
Paint Pro Shop (I am using Paint Pro Shop X3)
Tube of choice I am using Keith Garvey now found here.
Font of Choice
Frame (optional) but can be found here.
Scrapkit is titled Irish Blessing which is a PTU by Sleek N Sassy Designz and can be found here.

Now let's begin:
Open your Frame, hit the magic wand and click inside the frame, pick a paper( I used paper 3),and flood fill it, then you will select none.
You will then open your tube of choice.
Copy and paste wherever you think it would look nicely at.
You will then add your text.
Make sure if you are using a PTU artist you put the proper copyright, website information, and license number.
Then you will merge and save.

Thanks for trying this tutorial