Friday, July 29, 2011

PTU A Leprchauns Dance

This tutorial was created by Amanda D. Carter on July 29th, 2011. Please don't copy or claim as your own. A link back would be appreciated!!  This tutorial will require some knowledge of the Paint Pro Shop program.


Things need for this tutorial:
Paint Pro Shop Mine is X3
PTU Scrapkit by ArtlorDesigns titled Leprchauns Dance found at lollipopsngumdrops at this site http://www.lollipopsngumdrops.net/store/index.php?main_page=product_info&cPath=68_225&products_id=8450
Mask of choice I am using Gems Mask number 111 you can find at this site http://gemstagginscraps.blogspot.com/search/label/Masks
Tube of choice I am using Keith Garvey's St.Patty found at the PSP Tube Emporium where you may purchase his tubes.
Font of choice today is Monotype Cursive,size 30 which can be found at dafont.com.

Now let's begin our tutorial.

Open new image 600x600.
Select all and put a paper of choice in the selection ( I picked paper2), selection none and apply your mask then merge group.
Open frame 1, resize copy and paste as a new layer,duplicate,mirror the image and then merge down.
Now with your wand select both frames and put a paper of choice in it, I am using paper 1, then do add your tube in the frames by copy and paste as a new layer and then duplicate, shawdow of choice to both tubes, and then select none.
Now with that done we will add some elements.
Open the stpaddysdaybear and resize by 15 percent and add anywhere to your tag.
Now open bow1 and resize the same way, only duplicate,image and then mirror like mine.
Now add your text and then drop shawdow and then your done!!

Please remember to give credit where credit is due!!! Thanks again for trying this tutorial!!

Thursday, July 28, 2011

PTU Angel of Redemption

This tutorial was made by Amanda D. Carter on July 28th of 2011.  This is my own creation so please don't copy or claim as your own.  A link back would be appreciated if used.

Materials used:
Paint Pro Shop (I am using PSPX3)
KnC Scraps's PTU Angel of Romance, you may buy this kit at scrappin dollars at this link http://scrappindollars.com/index.php?main_page=product_info&products_id=5453
Mask WSL #342 found here
Tube of choice I am using a tube by Steve A. Roberts at this website you can view and find out how to download his tubes http://www.fantasy-graphic.com/Gallery-D.htm
Font of choice, I am gonna use Magnificat size 24 found at http://dafont.com
Plugins used: Xero-Porclain

Now let's begin our tutorial today.
Open a new image 460x460 in Paint Pro Shop, flood fill with a color from the tube(I am using color number #5e3a4e. or select all, and insert a paper of choice into selection and apply your mask.
Open the fence and resize to about 35 percent, copy and paste as a new layer, colorize it to a goldish color.
Open the frame and resize to about 35 percent and put above the gate, once there go back to the gate and erase anything outside of the frame.
Go to your tube and place inside the frame,resizing if needed to.
Now select the frame with the wand,selections modify expand by 5 and paste a paper and then hit invert delete to get rid of anything outside of the frame. Put the paper above the mask layer.

Now time to add some elements.
Select bfly1 resize and put somewhere on your tag.
do the same with bfly2.
Select bow1 and resize to about 25 percent and place on the frame, erase any that is hanging inside the frame and on the outside of the frame.
Now pick flower 1 and resize to about 25 percent and place on the bottom of the frame.

Now it is time to add some text.
Type in your name using font Magnificat size 24.
and now use the xero Porcelain settings like below..
You are now done with everything and I want to thank you for doing this tutorial with me, please remember to give credit where credit is due.

Thanks again,
Amanda





Wednesday, July 27, 2011

PTU Love Me/Hate Me

This tutorial was created by Amanda Carter on the 27th of July, 2011.  This tutorial requires some knowledge of Paint Pro Shop.  Please don't copy this tutorial in any way or claim it for you own, if use a linkback would be appreciated, thanks.


Materials Used:
Paint Pro Shop
Scrapkit PTU Love Me/Hate me by the talented Kim's Korner you may purchase this scrapkit at Scrapping Dollars
Mask used WSL #366 can be found at http://weescotslasscreations.blogspot.com/search/label/Masks
Tube of choice I am using KT_Bryan_Lacey which can be bought here
Font used is title My font isnt funky enough at dafont.com
Plugins used xero-Porcelain

Now let's begin this tutorial....

Open your mask, and tubes in PSP.
New image 600x600.
On that layer flood fill with a red and apply your mask.
Layers merge group.
Open your frame from the scrapkit, and paste as a new layer resize if needed.
Layers duplicate your frame and place under the original one and merge together.
Select both frames with your wand and put a paper of choice in frame,invert and delete anything out of the frames. ( I am using paper 6), with the paper we are gonna use the plugin Porcelain, with these settings:

Place paper under the frame, put your tube into the frames. (resize if needed).


Place the tubes in your frames,resizing if needed.
Now it is time to add some elements.
Select bow 1 and resize it about 35 percent and place on top of the frame.
Select heart 4 and resize to liking and place on the side of the frame.
Select shoe1 and resize to your liking,dulplicate image and place beside the other and place on the right corner of the frame.
Do the same with shoe 2, place on the bottom of the left corner and the upper right corner.
Open zipper heart4 and resize about 15 percent and place on the upper left corner.
Now add your text with your choice of colors. Then Porcelain it and your done.
Remember to crop after merging visible.

Please remeber to give the proper credits where they are due,thanks for doing this tutorial.

Tuesday, July 26, 2011

PTU Weeping Mandy

This tutorial was created by me on July 26th, 2011. This was made and copyrighted by Amanda Carter please don't claim as your own, a linkback is appreciated.

Things needed for this tutorial
PSP I am using PSPX3
Plugins used Eye Candy Gradient Glow
Scrapkit PTU Weeping Heart by Tammy's Scraps at http://www.lollipopsngumdrops.net/
Font used Just Realize at http://dafont.com
Template number 61 by Leah at http://amyleahsgimptastictuts.blogspot.com/search/label/Templates
Mask #360 at http://weescotslasscreations.blogspot.com/search/label/Masks
Tube of choice I am choosing a Suzanne Woolcott tube, she is a PTU Artist so you must have license to use, you can buy her tubes at http://suzannewolcott.com



Now let's begin this tutorial

Open your template, and delete the credits.
On the star line select all float and defloat and flood fill with a color of choice I am gonna use yellow.
Then go to your Eye Candy Gradient Glow with these settings:
Do the same thing only with a brighter yellow for your bigger stars.

Now were gonna go to the black rectangle and select all,float and defloat, pick a paper from your scrapkit and copy,paste and then invert delete,then merge down.
Do the same as above with the others, until we get to the background. (When you get to the pentagon that is where you will add your tube)
Now that were at the background select all and put a paper of choice in the selection and then apply your mask, then merge group.

Add elements of choice, you may follow mine if you wish,remember resize if needed.  Remember to drop shawdow

Now add your name using font Just Realize size 25 and then pick to make fit.
Then the Gradient Glow again, to your liking.

Thanks for doing this tutorial.
Please remember to use the proper credits!!!


Monday, July 25, 2011

PTU Fairy Dust

This tutorial was created by me on July 25th,2011. Any tutorial that looks like this one is pure conicidence.  Please don't copy or claim as your own. If you would like to use this tutorial a link back is appreciated.


Supplies needed:
PSP
PTU Scrapkit by Babyfairy sold at http://www.lollipopsngumdrops.net/store/ titled Fairy Dust, must buy to use this tutorial
 4Tubes of choice tubes by Deborah Anne Woods, and you can download some of her tubes at http://www.4shared.com/file/aQ9juuE9/Deborah_Anne_Woods_pngs.html
Mask of choice, I am using GemsMask number 168, you can download her mask at http://gemstagginscraps.blogspot.com/2010/03/new-mask-set-167-174.html.
Font of choice I am gonna use Andale Sans for VST


Now let's begin:

Open PSP, new image 750x750.
New layer and flood fill with a paper from your scrapkit. ( I picked paper1)
Apply mask 168,merge group.
Open element 1, resize to 10 percent and copy and paste as a new layer.
Duplicate 3x's putting them like mine. Once you have that done,close out your mask and merge visible.
Now with your wand select each frame and add a paper of choice (I am using paper pp1), now remember after pasting as a new layer you must hit invert,delete to make it look right.  After that is done, close out the frame and the mask and merge visible again, then put the papers below the frame. Now do the tubes the same way, and merge them also. 

Now were gonna add some elements:
Select babyfairy_Element1 and resize it to 10 percent and place it in the middle ofthe frames,sharpen and dropshawdow of choice.
Now pick babyfairy_Element3 and resize to 15 percent and place beside the edge of both frames like mine, dropshawdow of choice.
Now element 28 and resize and place on the bottom of the frame, you will have to use the pick tool to rotate it too look like mine.
Element 5 on the edge of bottom of frame like mine.

Now add your name and your done, if you used PTU Artist please remember your credits and license information.

Thank you for doing my tutorial.




Sunday, July 24, 2011

PTU Chances Are Tagger

This tutorial is created by Amanda Carter July 24th, 2011. This tutorial is my own creation so please don't copy and claim as your own. A link back is appreciated if you use it in your forums/groups.  Thank you.

Chances Are Tagger PTU Tutorial


Supplies needed:
PSP Program
Plugins- Eye Candy 5 Impact Extrude
Scrapkit Chances Are Tagger by BabyVDezign,this is a PTU and can be bought here.
Mask number 366 can be found here
Font of choice:Kozuka Mincho Pro L
Tube of choice, I am using FTU  Moonlight Serenitas by Ann Rigby which you can find her website here

Now let's begin:

Open a new image 400x400 transparent.
On a new layer flood fill a color of choice, I am picking a nice blue from the tube.
Open mask and apply your mask.
Layers merge group. Increase the size of the mask.
Open Frame2 and resize to about 15 percent. Copy and paste as a new layer. Move to the left side of the tag. Duplicate, image mirror. Merge down and then resize again about 95 percent this time.
Pick a paper from the kit, I picked paper 4.
With your wand, select your frames and paste the paper into selection, then select none.
Now resize your tube to your liking and put it in the frame, duplicate your tube and then image mirror and place beside the other tube.
Now add some elements, you can do mine as followed:
Butterfly 1 resize by 35 percent and place somewhere near the frame then image duplicate and mirror.
Flowerstamp 2 and place between the two frames.
Heartpillow resize by 35 percent and place somewhere near the bottom of the image duplicate and then image mirror.
Now go to the bottom of the layer where your mask is and place the bubbles on the mask. Rotate as seen on image using your pick tool, and then duplicate and image mirror then merge together.

Now place your name, using colors from the image and place where it can be seen, and then use eye candy 5 impact Extrude with these settings:

Now that were done with this add your credits,watermark, merge together and save!!!

Thanks for doing this tutorial.




Wednesday, July 20, 2011

FTU Patriotic

This tutorial was created entirely by me.  Any resembles to other tutorials are pure conicidence.  Please don't copy this tutorial or claim as your own. If you would like you can link my tutorial to your site.  Now let's begin this tutorial.  This tutorial is for people that have knowlege of Paint Pro Shop and it's tools.

Materials needed:
PSP Program, I am using X3 but any other versions will do
FTU Patriotic scrapkit by Cryene, you may find her wonderful scrapkit here
Template number 104 located here
Mask 454 by Vix you can get it here
Plugins used Eye Candy 3 Gradient Glow and Bevel
Tube of choice I am using USAElliebear by Ellibabe, you can find her tube at http://PSPTube.Depot.com
Font of choice, I am using Edward Script size 25

Now let's begin!!!
Open template 104, and then delete the credits.
Select your stripes and color them with one of your papers from the scrapkit using select all, float and then defloat and then invert and delete.
Select the stars and select all and flood fill them with blue.
Then go to effects and select eye candy gradient glow with these settings:
Do the same for the larger stars.
Now on the Top stars do the same thing only change the color to yellow.
Now we are going to do the backs, pick a color from the scrapkit select all, float and then defloat and then invert delete.
Now were gonna do the Frames around the backs, select all, and then float. Then flood fill with a red.  Now the the Eye Candy again you gonna do the Bevel with the settings below:


Now it is time for your wordart.  Select all, float and then defloat and then pick another paper and then invert and then delete and then use your eyecandy gradient glow.
Now it is time to merge your frame and your backs. Then select all and add your tube of choice in each frame.  Drop shawdow of choice your tube.

Now add your text, using a paper from your scrapkit, and then do the eyecandy gradient glow settings as before.  Now remember to add all credit and copyrights and your done, and to merge all layers.

Thanks for doing my tutorial!!!

Friday, July 15, 2011

PTU Dream Princess

This tutorial was written by me on July 16th 2011.  Any tutorial that resembles my tutorial is pure conicidence.

Materials Used
Paint Pro Shop X3
PTU Scrapkit by Disyas Digital Designs :: called Dream Princess can be bought at this site: http://enchanteddreamsboutique.com/index.php?main_page=product_info&cPath=1_100&products_id=1075
Mask number 4 located here.
Template Pink Princess here
Font used MC Sweetie heart located at this forum
Tube used is by Anna Rigby and found here

Now let's have some fun!!!


Open template Prink Princess and delete the credits.
With black strip right go to selections then float and then defloat.  Pick a color from your papers and then copy,paste as a new layer, invert and then delete. Do the same thing to the other black strip right, so they will match.

Now your gonna go up to the left ones and do the same thing.
Now we are gonna go to the drk pink strip right and do the same as we did before only a different paper this time.
Do the same thing to the drk pink strip left.
Do the same for the overlay1&2 only use another paper.
We are gonna leave the white rectangle white, and the pink rectangle as is also.
Now the dots we are gonna select all, float and then defloat.
We are then gonna paint them with yellow (make sure all dots are filled in).
Then go into effect and hit the Lights effect like so.


The pink oval and the white oval we are gonna leave as is.
The grey oval we are gonna do the select all,float and defloat, now remember to pick a nice paper for this one.
The black star leave alone but make the pink star have the same effect as the dots.
Now we are gonna go the crown.
With colorzation, colorize the crown yellow and make it glow using eye candy 5 Impact, with these settings...
Now select the stars, the same way you did with the dots and do the same thing with the effect that you did with the dots.
Now we are gonna add our tube by selecting grey oval (that is the one you changed with a paper of choice), do the select all like your putting a new paper in only add your tube.
Select none and merge down.
Now apply mask of choice using a color of choice or paper of choice.
Add your text and then make it glow like before and then your done.
Remember to add all credits needed and if you used a license tube then don't forget your license number.

Thanks for doing this tutorial with me